Cleaning / Repairing / Preventive Maintenance
Just normal cleaning, with water and non-aggressive cleaning product (BUILDAIR can recommend some specific ones).
Yes, with the repair kit (textile + adhesive system for textile patches). Also to be said that for small punctures or damages, there is no urgency to perform the repair: the air blown by the inflation motor will automatically increase (as mandated by the Automatic Control System), to compensate the pressure loss due to the small puncture or damage.
There is no need to remove the tubes for small-medium damages, as the patches can be applied without removing the tube from the rest of the structure.
If the damage is large (several meters long torn), it can be necessary to remove the tube from the rest of the structure, in order to repair it.
Simple tooling, plus textile patch and adhesive, all of them supplied by BUILDAIR. The User Manual shall include a detailed and complete description of the repair procedure.
The answer is yes. If the damage is not very large, these repair works can be performed by the end-user, after receiving proper training by BUILDAIR (this training can take place during the 1st set-up of BUILDAIR structure).
There’s a specific Maintenance Plan to be carried out, with ordinary daily inspections (to be performed by end-user), ordinary monthly inspections (to be performed by Buildair or the end-user, if properly trained), ordinary annual inspections (to be performed by Buildair) and extraordinary inspections (if something unexpected happens: extremely high winds, big torns or punctures, etc.).